how to clean velcro

How To Clean Velcro?

by

Figuring out how to clean Velcro is very important as dirt and debris can easily get caught in it. Velcro is a fastener that is used in a variety of applications like shoes, bags, clothes, and so on. They are made up of two pieces; the hook and the loop. Lots of things can get into the hook and loop fasteners which makes the Velcro not work properly. So, today, I will teach you how to clean Velcro so it sticks again. Fortunately, Velcro is very easy to clean and requires very less maintenance. Let us learn how to clean Velcro to make it last longer!

How To Clean Velcro?

In this section, I will show you how to clean Velcro in detail. The fasteners won’t get a good grip when lint and trash are stuck on Velcro. Do not worry! With the right tool, you can easily clean out Velcro straps in less than a few minutes.

You can easily learn how to clean Velcro by using the following tools.

  1. Lint Roller
  2. Duck Tape
  3. Your Fingernails
  4. Toothbrush
  5. Tweezers
  6. Tape Cutter
  7. Comb
  8. Running Water
  9. Using Other Fasteners

Velcro wears down naturally and can lose its durability over time. Even though they have a short lifespan, regularly cleaning them can prevent wear and tear from happening faster! You can keep on reading to learn more about how to clean Velcro strips.

Different Tools To Clean Velcro

Over here, I will show you how to clean white Velcro straps using different Velcro cleaning tools.

  1. Lint Roller

A lint roller is a great tool that helps to keep your clothes and upholstery looking fresh and clean. This little handy gadget can also be used to clean Velcro to remove lint and other dust particles. Follow these steps to learn how to clean lint out of Velcro.

  1. First, place the fastener on a flat surface.
  2. Hold one end of the fastener and roll the lint roller over it.
  3. Do this a couple of times to remove lint.

While using a lint roller, you can refresh to a new sticky sheet if necessary.

  1. Duck Tape

Duck take is a multipurpose tape that is often used for general sealing, patching holes, packing boxes, and repairs. Luckily, you can also use duck tape to clean Velcro! Follow these steps to learn how to clean Velcro straps.

  1. First, place the fastener on a flat surface.
  2. Cut a piece of duck tape (not bigger than your palm).
  3. Hold one end of the fastener and place the duck tape on it.
  4. Now, press the tape on the Velcro to remove as much as dirt possible.

This method can be time-consuming as you need to perform this step several times.

You can keep on reading to learn how to clean hair from Velcro.

  1. Your Fingernails

Surprisingly, your fingernails can also be used to clean Velcro! Simply lay the fastener flat on the surface and pick off any dirt particles with your fingernails. Make sure you give the fastener a good scrape with your fingernails to make it lint-free in no time!

  1. Toothbrush

A stiff toothbrush can easily help you to clean Velcro much faster. You can follow these steps to learn how to clean hair out of Velcro.

  1. First, lay the fastener on a flat surface.
  2. Hold one end of the fastener firmly.
  3. Grab a toothbrush and clean the fastener with short, hard strokes.
  4. Make sure you start from one end of the fastener to the other.

During this process, make sure you pick any dirt that comes on the top and then repeat the steps if required.

  1. Tweezers

A pair of flat or angled-tipped tweezers also works great to clean Velcro. You can follow these steps to learn how to clean Velcro on a jacket.

  1. Place the fastener side of your jacket on a flat surface.
  2. Now, hold both ends of the fasteners very firmly.
  3. Remove the debris with the tips of the tweezers.

Thus, tweezing is a straightforward method to clean Velcro directly. Make sure you pluck away the dirt just like you groom your eyebrows by plucking your hair.

Let us now check out how to clean Velcro straps on shoes.

  1. Tape Cutter

A tape dispenser has a saw-tooth cutting edge which easily cuts the tape. This saw-tooth cutting edge does a great job of scraping dirt out of Velcro. Follow these steps to learn how to clean Velcro on shoes.

  1. First, lay the fastener flat on a surface.
  2. Then, use the saw-tooth edge of the tape dispenser to scrape the fastener.
  3. Make sure you scrape in short firm strokes from one end to the other.

While cleaning, grab the loosened lint/dirt with your fingers or sticky tape. You can even use this hack if you want to know how to clean dog hair off Velcro.

  1. Comb

A fine-toothed comb can be used in substitute of a toothbrush to clean hair out of Velcro. Follow these steps to learn how to clean hair out of Velcro.

  1. Start by placing the fastener on a flat surface.
  2. Tackle the dirt beneath the surface of the fastener with a fine-tooth comb.
  3. Make sure you comb in short forward and upward movements.

This cleaning Velcro hack will surely help you to remove lint and fluff from the top of the Velcro.

  1. Running Water

Velcro rollers can instantly create effortless, long-lasting heatless curls. You must clean your Velcro rollers if you use them very frequently. Follow these steps if you don’t know how to clean Velcro rollers.

  1. Pull out any hairs stuck on the rollers with a small comb.
  2. Now, prepare a solution of warm water and a clarifying shampoo.
  3. Gently cleanse each roller with this solution to remove any dirt and oil.
  4. Make sure you rinse the rollers thoroughly to remove any soap residue.

You can even use a vinegar solution to get rid of dirt or oil on the roller. Use a pair of scissors to cut any excess hair if they are tightly stuck on the roller surface.

  1. Using Other Fasteners

You can clean most Velcro items by using other fasteners. Simply rub the hook (scratchy side) of the fastener with another hooked fastener. This will help you to loosen the debris without putting much pressure. Thus, this method works well if you are in a hurry!

Let us now check out how to clean the Apple watch Velcro band.

Clean Apple Watch Velcro Band

Apple Watch Velcro bands are not machine washable as they can cause damage and discoloration to the band. You can make it look presentable only if you know how to clean the Velcro Apple Watch band. Simply use a brush with soft bristles to clean the watch band. If required you can use mild soap and fresh water to clean them thoroughly.

Make sure you never soak the band in water or any chemical solution. You must always use plain water and that too as little as possible!

Learn more about similar topics like these on Clynerr

Click here – How To Clean Pokemon Cards?

FAQ

Does Washing Destroy Velcro?

Nope. Velcro hook are made of nylon and the loop pile is made from nylon wool. Both are impervious to water.

How Do You Get Dog Hair Out Of Velcro?

Use A Lint Roller

One of the simplest and most effective ways to remove pet hair from any material is by using a lint roller. This tool consists of a handle with adhesive paper wrapped around it. As you roll the lint roller over velcro, the adhesive paper will pick up any pet hair that’s stuck to the material.

Can Sticky Velcro Be Washed?

VELCRO® Brand Sticky Back Fasteners for Fabrics just might be the most convenient tool in your sewing kit! Use this no-sew fastener in place of buttons, snaps, zippers or hook and eye closures. It’s easy to use and so durable it can withstand laundering (warm water wash and tumble dry low).

How Long Does Velcro Last?

Most hook and loop fasteners can withstand up to 20,000 cycles. This is a factor most people never consider. Unless the material is specially formulated to resist ultraviolet light, frequent exposure can dramatically lower VELCRO® Brand’s durability.

Can You Clean Velcro With Water?

You can wash VELCRO® by hand or in the washing machine. If you are washing by hand, use warm water and mild soap. If you are washing in the machine, use a mesh bag to protect the VELCRO®. Set the machine to a delicate cycle and use cool water.

Is It OK To Wet Velcro?

The idea that you can’t wash Velcro is a well-circulated myth, but the truth is that with its hook and loop fasteners, Velcro can withstand pretty extreme conditions, including high heat, sunlight, and rain.

Click here – How To Clean Mason Pearson Brush?

Conclusion

In the above post, I’ve discussed how do you clean Velcro so it will stick again. You can easily clean unwanted lint and debris from Velcro by using different cleaning tools. A stiff-bristled toothbrush works well to scrub both sides of the hook and loop fastener. Another recommended method to clean Velcro is a lint roller. A good sticky lint roller can pull out the debris without putting much effort. A piece of duck tape or a fine-toothed comb will also remove debris from the fastener this is one of the way for how to clean Velcro with which you can clean and maintain the fasteners! 

How do you make Velcro less sticky

What can I use to clean Velcro